Safety Relief Valve A Safety Relief Valve is a pressure Relief Valve marked by rapid opening or pop action or by opening in proportion to the increase in pressure over the opening pressure depending on the application. These relief valves offer significant advantages in the manufacturing, energy production, and transportation sector. Investing in Industrial […]
What is Glass Tube Rotameter? An industrial flowmeter from Spink Controls is available for measuring the flowrate of gases and liquids. It worked on the principle of variable area, where fluid movement lifts a float in a taper tube, thereby expanding the area of fluid passage. The float is raised higher in proportion to […]
Manometer is an instrument for measuring the pressure acting on a column of fluid that consists of a U-shaped liquid tube in which the liquid rises to various heights in the tube arms due to different pressures acting in the two arms of the tube. The manometer was invented by Otto Von Guericke, a German […]
FIDICON is a pioneer in the field of manufacturing Float and board level gauge (Model NO. FDI-FBLI-401) in India since 2002 years of designing, manufacturing, installation and service of the same. Level gauge manufactured by FIDICON are user friendly and easy to install. It comes in many ranges and can be tailor made as per […]
It is a device used for measuring flow rate, for pressure reduction or for flow restriction (for this reason it is also called a restriction plate). Orifice Plate Depending on the calculation associated with the orifice plate either a volumetric flow or mass flow rate may be determined whenever needed. Measurement of flow rate using […]
It is a level gauge that provides safe and direct observation of fluid level in tank/vessel either rising or falling of the fluid under high temperature & pressure inside a specified system. Reflex Level Gauge: A visual fluid level indication can be observed through Reflex Type Level Gauge. One side surface of Reflex Glass […]
A rotameter variety known as a rotameter is also referred to as a variable area flowmeter. In commercial settings, it is used to gauge the velocity of air and liquids (such as water, oil, and others). In addition, it is utilised in medical devices like anaesthesia machines, oxygen tanks, and concentrators. The height and shape […]
What is Level Gauges? An instrument used to measure the volume of liquid in a stationary storage or processing tank is a level gauge. A gauge’s parts include the head, float, tape, bottom anchored bracket, guidance wires, elbows, anchors, coupling, pipe support brackets, and pipework. When using Level gauges, the Liquid Level Gauge Calibration is […]
Rotameter is a flow meter used to measure the flow rate of a liquid or gas. It works on a simple operation wherein a liquid or gas passes through a tapered tube and a float rises. The flow of the liquid or gas raises the meter’s float, increasing the area through which the media may […]
What is a Rupture Disc? Rupture discs are safety devices with a definite breaking point, which respond to a specific pressure and are used for pressure relief. The system is also known as pressure safety disc, burst disc, burst disc, or burst diaphragm. In many cases, these discs protect the pressure vessel from over-pressurization or […]
