Pioneer in Manufacturing of
Flow, Level & Pressure Measuring Instrument, Process Control & Safety Equipments
Serving industrial demands globally since, 2002.
Our Hot Products
Flame Arresters
Flame arresters are typically used wherever there is the potential for an explosion arising from flammable gas or vapour being mixed with air. Accidental ignition of a flammable mixture will result in a flame that will travel through the unburnt mixture until the fuel is consumed by the reaction.
Performance of all of our Flame Arresters Comply with ATEX , ISO / IS, ASME, API Standard Requirements.
- End of Line Flame Arrester
- In of Line, Bi-Directional Flame Arresters
- Eccentric, Bi-Directional Flame Arresters
- Stable - Unstable Detonation / Deflagration Short time burn / Endurance Burn
- Negligible Pressure Drop
- Designed and Customized as per Flow Requirements.
- Sensor Mounting for Temperature Monitoring.
Our Hot Products
Rotameters
Variable area Flowmeters or Rotameters are devices used to measure the Flow in the process line. it can be used to monitor flow and control valves can be used in series to control the flow based on the Rotameter’s calibrated measurement scales.
Performance of all of our Products comply with ISO , ASME Standard Requirements.
- Glass Tube Rotameter
- Metal Tube Analog / Digital Rotameter
- Bypass Glass Tube Rotameter
- Low Flow Rotameters / Acrylic Body Rotameters
- Negligible Pressure Drop
- Designed and Customized as per Flow Requirements.
- Additional Features / Sensor Mounts Available, ex. Totalizer
- Robust Construction, Highly Durable Product
- Accurate Flowrate Measurements.
Our Hot Products
Pressure - Safety Relief Valves
A pressure Relief Valve is a safety device designed to protect a pressurized vessel or system during an overpressure event. An overpressure event refers to any condition which would cause pressure in a vessel or system to increase beyond the specified design pressure or maximum allowable working pressure (MAWP).
Performance of all of our Products comply with ISO / IS - IBR , ASME , API Standard Requirements.
- Conventional Pressure Safety / Relief Valve
- Designed according to Flow requirements.
- Orifice Sizing with Reference to API Standards.
- One / Two Point Guided Nozzle for Better alignment.
- Additional Drain Ports / Internal Coating as per needs.
- Robust Construction, Highly Durable Product
- Designed on Concepts of Safety, High Performance, Interchangeability and Simplicity.
Our Hot Products
Emergency / Gauge Hatch
Hatch Provides tank access, where manual level gauging, temperature measurement or sampling is required. The Foot Pedal allows the operator to open the gauge hatch whilst remaining hands-free to carry out required measurements. Gauge / Sampling Hatch can also be used as Emergency Pressure Relief when abnormal pressure in tank is observed.
Performance of all of our Products comply with ISO / IS - IBR , ASME , API Standard Requirements
- Conventional & Non Spark Type Hatch
- Designed according to Emergency Flow Requirements.
- Sizing with Reference to API Standards.
- Ease in Operation using Foot Peddle.
- Easy & Quick Locking / Unlocking of Hatch Cover.
- Robust Construction, Highly Durable Product
Our Hot Products
Breather Valve
Sometimes referred to as pressure and vacuum relief valve, the breather valve is an important part for atmospheric tanks & vessels in which solvents are filled and drawn at a high flow rate. This type of valve is installed in the in-and out-breathing lines of tanks, vessels and process equipment to retain toxic vapours and avoid atmospheric contamination, thus balancing unpredicted fluctuations in pressure & vacuum and providing increased fire protection and safety.
Performance of all of our Products comply with ISO / IS - IBR , ASME , API Standard Requirements.
- Conventional Dead Weight / Spring Loaded Valves.
- Designed for Normal & Emergency Flow Requirements.
- Pressure / Vacuum Only Breather Valve
- Flame Arresting Features in Inbuilt & External Type Valves.
- Silica Gel Containers for Moisture Prevention
- Pipeway Type Valve / Nitrogen Blanketing Features.
Our Hot Products
Variable Area Flowmeters
Digital Metal Tube Rotameter operates on the principle of variable area the fluid in the metal tube raises the float in the taper tube increasing the area of passage of fluid. By a magnetic coupling the inner float movement through a series of linkages and counter weight. The tube and the float combination determines the flowrate. The inner float magnetic field is detected by the high sensitive magnetic field detection sensor, enable us to show the digital readout. As such this Flowmeter does not require any electrical connection, since it operates on battery. This got an inbuilt two wire transmitter just provide 24 vdc and take 4 – 20 ma signal.
Performance of all of our Products comply with ISO / IS - IBR , ASME , API Standard Requirements.
- Local indication without the need for auxiliary power.
- Suitable with Low (8 LPH) & High (150m3/hr) Flows.
- Default Inbuilt Transmitter of 4 – 20 mA (Double Loop powered).
- Power Source used : (9 VDC Battery), Indication : Digital.
- Pressure Rating: upto 80 Kg/cm^2.
RANGE OF PRODUCTS
solving the needs of industries with our wide range portfolio to ensure guaranteed performance and durability that lasts long.
Dedicated to People & Environment Protection
Our Toll Free Number
1800 123 3977Some of Our Customers
Latest News & Blogs
What Is A Flame Arrester...
What Is A Flame Arrester? Flame arresters also called flame arrestors are devices designed to...
Read MoreWhat Is A Breather Valve?...
What is a Breather Valve? A Breather Valve is a safety feature attached to a...
Read MoreEverything You Need To Know...
What is a Rupture Disc? Rupture discs are safety devices with a definite breaking point,...
Read MoreRotameters: Types, Applications, Benefits
Rotameter is a flow meter used to measure the flow rate of a liquid or...
Read MoreWhat Are The Types Of...
What is Level Gauges? An instrument used to measure the volume of liquid in a...
Read MoreRotameter- Working Principle, Uses, Pros,...
A rotameter variety known as a rotameter is also referred to as a variable area...
Read MoreWhat is Reflex Level Gauge?...
It is a level gauge that provides safe and direct observation of fluid level in...
Read MoreWhat is Orifice Plate? Types...
It is a device used for measuring flow rate, for pressure reduction or for flow...
Read MoreWhat is Float And Board-Level...
FIDICON is a pioneer in the field of manufacturing Float and board level gauge (Model...
Read MoreWhat is a Manometer &...
Manometer is an instrument for measuring the pressure acting on a column of fluid that...
Read MoreWhat is Glass Tube Rotameter?
What is Glass Tube Rotameter? An industrial flowmeter from Spink Controls is available for...
Read MoreWhat are Safety Relief Valves...
Safety Relief Valve A Safety Relief Valve is a pressure Relief Valve marked by...
Read MoreWhat is an Emergency vent?...
What is an Emergency Vent? Emergency venting is a pressure relief device designed to protect...
Read MoreWhat is a Variable Area...
A variable area flow meter is a widely used instrument for measuring fluid flow rates...
Read MoreUnderstanding the Working Principle of...
Magnetic level gauges operate based on the principle of buoyancy and magnetism. The devices consist...
Read More